Dreamcast Noctua Fan 3D Print Mod with Latch & Cable Adapter (colors available)
+ $4.99 shipping
The fan you should be using with your Dreamcast is the Noctua NF-A4x10 5V Version and not the FLX or PWM version. SEGA Dreamcast Noctua Fan and Latch Installation - YouTube. Everything you need ready to install with no cutting of the GD-Rom necessary!
Internal Cooling Fan
For Sega Dreamcast
USPS First Class
Additional Product InformationThis is the adapter to upgrade your Dreamcast fan for original or aftermarket Dreamcast shell. Everything you need ready to install with no cutting of the GD-Rom necessary! The plastics used are optimized for each part. Colors available!
**Please specify if you have an aftermarket shell and I will send one that fits your shell.
VERIFIED TO BE THE STRONGEST ON EBAY!! (See Pictures).
Other sellers have shown their fan adapters holding 2.5kg weights and claim to be the strongest. See the photo of this adapter holding 1 GALLON of liquid, that is 3.79KG!!! Proven 1.5 times stronger!
3D Printed Fan adapter printed with improved flexibility, heat resistance, and strength.
3D Printed Latch printed in PLA-MAX which is much stronger than PLA but still very rigid.
Adapter Cable to plug fan straight into your dreamcast with the correct resistor soldered in <- beware not all sellers are including this and you need it for the mod.
One piece latch design for easy install and assembly (I found the two pieces are hard to assemble).
Installs with the standard 40mm fan screw that comes with your Noctua fan.
Ready to install no other parts needed (except your fan).
Colors available just specify at checkout (blue, orange, gray, white, green, purple).
The fan you should be using with your Dreamcast is the Noctua NF-A4x10 5V Version and not the FLX or PWM version. .
Only the 5v version will work so if your fan doesn't spin please verify you have the right fan.
SEGA Dreamcast Noctua Fan and Latch Installation - YouTube.
Video will open in a new window.
Using the eBay App? Paste link into a browser window:.